News

POP bandage is a medical product mainly composed of plaster powder, gum material, and gauze. This type of bandage can harden and solidify in a short period of time after being soaked in water, and exhibits strong shaping ability and stability.
The main indications for POP bandage include fixation in orthopedics and orthopedics, such as fracture fixation, external fixation in orthopedics, and immobilization of inflamed limbs. In addition, it can also be used to make molds, assistive devices for prosthetics, and protective brackets for burned areas.
When using POP bandage, it is important to pay attention to some key steps. Firstly, immerse the bandage in warm water at 25℃ -30℃ for approximately 5-15 seconds until no continuous bubbles are produced. Then, remove the bandage and use both hands to squeeze from both ends towards the middle. Next, roll the bandage evenly around the area that needs to be fixed, and at the same time, flatten it by hand while wrapping. It should be noted that the winding process must be completed within the curing time of the plaster bandage.
The specifications of POP bandages are diverse, including different sizes and types, such as scroll and flat folding, as well as quick drying, regular type, and slow drying type. When choosing, you can choose according to specific needs.
Finally, to ensure the effectiveness and safety of POP bandage, they should be stored indoors with a relative humidity of no more than 80%, no corrosive gases, and good ventilation. At the same time, when using, it is necessary to use tissue paper or cotton covers as padding in the areas that need to be fixed.
Please note that although POP bandage are widely used in the medical field, it is still necessary to follow the guidance and advice of professional doctors during use to ensure the safety and reasonable use of patients.
POP bandage are usually used in conjunction with under cast padding for pop.Under cast padding for pop is an important auxiliary product in the use of gypsum bandages. It is mainly used to prevent the heat generated during the solidification process of bandages from causing burns to the skin, and also helps to prevent pressure ulcers, ischemic contractures, ulcers, and infections caused by plaster compression.
Under cast padding for pop are usually made of materials such as cotton or non-woven fabric. These materials are not only soft and comfortable, but also have a certain degree of breathability and moisture absorption, helping to keep the skin dry and clean, increasing patient comfort, and alleviate patient discomfort.
The specifications of under cast padding are diverse to meet the needs of different patients. At the same time, according to different usage scenarios and needs, there are also advanced care pads and other types of specifications to choose from.
When using under cast padding for pop, they should be placed between the area that needs to be fixed and the plaster bandage to ensure that the pads are flat and free of wrinkles. In this way, under cast padding for pop can effectively provide protection and prevent unnecessary damage to the skin.

It should be noted that although under cast padding for pop can help improve the comfort and safety of using gypsum bandages, they cannot replace the guidance and advice of professional doctors. When using plaster bandages and pads, patients should follow the doctor's guidance to ensure proper use and achieve the best therapeutic effect.

To learn about other disposable medical products,
please contact: +86 13601443135 sales@jswldmed.com